Discharge Machine
Also known as EDM machine tools, can be divided into forming discharge
machining (EDM machines) and wire electrical discharge machining (WEDM) two.
Forming Discharge Machine
(1) file storage provides more than twenty thousand (mainly determined by the
size of the internal hard disk), 20,000 processing coordinate Hing processing
conditions can be stored separately according to different molds or customer
numbers, so with multiple sets of machining coordinates memory function and has
a power outage last set of processing the coordinates and the memory function of
processing conditions.
With 10 segments automatically repair fine features can be: (1) self-edit to
edit the processing conditions: according to personal experience; (2) AUTOZ
automatic edit: to give a maximum depth of the initial current and the
completion of processing the coarseness and the processing area to select, on
processing conditions will be automatically edited; (3) Intelligent condition
edit: as long as the cross-sectional area of the electrode geometry \ the
electrode and the workpiece material, electrode \ drill edmg to complete the coarseness and
depth settings will be automatically edited the processing conditions, the above
three editor can be used by the coarse, fine time to complete processing.
Editing can be inserted or deleted can be more flexible to edit the processing
conditions.
3 with the mirror processing circuit, the real erosion of the mirror effect.
With shaking processing Hing mixed powder processing better.
4.XYZ coordinate
metric, English and Chinese and English switch.
Smart coke detection set to start the coke hardware detection circuit, each
discharge pulse line detection, encountered bad pulse current output will be cut
off automatically reduces efficiency, it is not prone to short-circuit current
caused by carbon deposition; anti coke adjustment function automatically. The
case of coke processing instability, the computer automatically adjusts the
processing parameters, and automatically improve slag height of automatically
restore stability.
6. Processing can be modified at any time to adjust the processing conditions
and depth; edited segmentation processing can choose to avoid duplicate
processing of the processed processing to the first few paragraphs from the
first few paragraphs.
7 functions: high jump (jump control) discharge can be set 2 to 10 times,
pulled up to the (safety height) set anywhere and then go have a good slagging
effect processing for deep hole machining.
8 eliminate secondary discharge function and coke to quickly move up or
discharge Edge fast l function.
9 has the energy to control the selection function to turn off the energy
control allows fine machining of graphite or repair more quickly and evenly. To
do the processing faster.
10 up to discharge the function of (poured processing), then the special
workpiece more easily.
11 with two independent processing coordinate system, the public mode and
master mode in different points in the coordinate system or processing.
12 fast jump slagging, two speed slagging and slow jump slagging apply to
different sizes of copper workers processing.
13 Two high-voltage circuit according to customer demand for assembly of the
partial pressure or shunt. Greater use of space on the different
processing
14 discharge high-voltage pulse control, can set different types
of high-voltage pulse with the use of speed and consumption.
15 closer
connections between the PC104 slot version and board does not have ISA slots
cheat oxidation of poor contact.
16 industrial-grade PC-BASE controller and
the new DOM memory to replace traditional hard disk, read the file faster high
stability is more suitable for industrial use.
17 new design meets European CE safety specifications of the power supply box
and 15 "CRT (display), can be dust, waterproof, anti-interference, improve the
life of electronic boards.
没有评论:
发表评论